2022/11/03

What is the advantage of German LAUFFER laminator?


1. The steel structure body of LAUFFER laminator is welded with high-strength steel plates according to the computer precision structure calculation and stress deformation analysis. After complete internal stress relief, it is integrally formed and processed to ensure the repeated accuracy of mechanical durability.

MORE →

2022/11/03

What is the difference between heat transfer oil hot press and chipboard hot press?


Hot oil hot press including support (1) , a hollow hot pressing plate (2) is arranged on the support (1), and the hot pressing plate (2) can move up and down in the support (1); One side of the hot pressing plate (2) is connected with a fuel supply pipe (3), and the other side of the hot pressing plate (2) is provided with a fuel return pipe (4). Both the fuel supply pipe (3) and the fuel return pipe (4) are respectively connected with the heat transfer oil heater (5). The heat transfer oil hot press comprises a bracket, on which a hollow hot pressing plate is arranged, and the hot pressing plate can move up and down in the bracket; One side of the hot pressing plate is connected with a fuel supply pipe, and the other side of the hot pressing plate is equipped with a fuel return pipe. Both the fuel supply pipe and the fuel return pipe are separately connected with the heat transfer oil heater. Oil pipes are used to send the heat transfer oil to the hot pressed plate for heating. The heat transfer oil circulates in the heat transfer oil heater, replacing the traditional steam heating. It has the advantages of fast temperature rise, uniform temperature distribution, simple layout and simple implementation.

MORE →

2022/11/03

How to solve the surface problems caused by laminate?


Signs of surface problems caused by laminate: poor adhesion of printing materials, poor adhesion of coating, some parts can not be etched, and some parts can not be soldered. The inspection methods can be used: generally, water is used to form visible water lines on the board surface for visual inspection, or ultraviolet lamp is used to irradiate the copper foil to check whether there is resin on the copper foil.

MORE →

2022/11/03

Introduction to small press


The following introduction to these features of the small press is just a summary. For more information about the products, please visithttp://www.szvstar.com/

MORE →

< 1234...15 >