Partner
全部分类

Installation of accessories for vacuum laminator

Published:

2022-11-23 15:44

In the work combination of vacuum laminator, a kind of accessory is called buffer pad. The buffer pad is clamped between the hot platen and the template. Its main function is to make the working pressure and temperature of the hot platen evenly transmitted, which can make the adhesion between the paper veneer and the substrate more compact, even and flat, thus improving the surface and internal quality of the veneer. The cushion also has excellent properties such as heat resistance, compensation of pressing plate error, and protection of formwork. Therefore, buffer pad is an indispensable accessory in vacuum laminator. Today, let's learn some things to pay attention to when installing the cache pad.

During installation, the cushion pad shall be clamped between the hot pressing plate and the template. During installation, the cushion pad of the hot press shall be placed on the hot press smoothly and evenly. Before installation, the surface of the hot press shall be cleaned to avoid any sundries, oil stains and other metal objects. In addition, the cushion pad must be installed from top to bottom. Clean the surface of the multilayer hot press before installation. In the fixing process, only the four corners in the length direction need to be fixed, and the width direction should not be fixed. Preheat and press for 30 minutes according to the working requirements, and then fix the four sides at an equal distance before putting them into use. It should be noted that one cushion should not be used continuously with multiple templates during the use process to avoid twists and turns of the cushion, so as to prolong the service life and improve the flatness. Attention: If it is accidentally displaced during installation, do not use wire pliers to pull it hard to avoid damage and affect the use. At ordinary times, do not let the oil stain pollute the surface of the hot press cushion pad, affecting the use effect and shortening the service life. The installation of the buffer pad of the vacuum laminator will also affect the production process, so the installation must be carried out according to the requirements.

Recommended News