全部分类

Taiwan Optical Fiber PCB Reference Hole Drilling Machine TDZ-600A Safety Precautions

Published:

2022-11-23 15:42

Taiwan optical fiber PCB reference hole drilling machine TDZ-600A is only applicable to FR4 multilayer board, FR4 double-layer board, FR4 inner layer board, electric board, FPC board, black/brown negative film reference hole and punch positioning hole.

Taiwan optical fiber PCB reference hole drilling machine TDZ-600A can be used for 5-8 years under normal conditions.

Main parameters:

Processing thickness T=0.1~2 mm

Machining hole diameter Φ= 1.4 ~ 4 mm

Drilling speed 1 sec/hole (at t=0.1mm, Φ= 3mm)

Machining accuracy ± 0.015mm

Taiwan optical fiber PCB reference hole drilling machine TDZ-600A safety precautions:

A. Before operation, the operator shall read the operation manual carefully or be instructed and trained by the skilled machine personnel before operation.

B. Attention is required to operate this machine. It is recommended to take a rest of 5 minutes every hour and not more than 8 hours a day.

C. The power cord and screen cord should be cleaned up to avoid tripping hazards.

D. Confirm whether the shield is indeed installed.

E. Use gloves during maintenance.

Recommended News