Partner
全部分类

Working Principle of AP-320A Reference Hole Puncher

Published:

2022-11-23 15:41

Usage: mainly for the processing of positioning holes in soft circuit boards, negative films, mobile phone panels, plastic nameplate, etc.  

Working principle, All the above steps and judgments must be completed in about 0.6 seconds, and the accuracy is required to be ± 0.015mm

Precautions for operation:

A. Before operation, the operator shall read the operation manual carefully or be instructed and trained by the skilled machine personnel before operation.

B. Attention is required to operate this machine. It is recommended to take a rest of 5 minutes every hour and not more than 8 hours a day.

C. The power cord shall be cleaned up to avoid tripping hazard.

D. Confirm whether the shield is indeed installed.

E. Use gloves during maintenance.

Recommended News