全部分类

Taiwan's Sharp Screen Printing Machine Operation

Published:

2022-11-23 15:26

 

Taiwan Xiangrui screen printing machine is designed for the special use of printed circuit boards. The printing machine has aesthetic appearance, high overall structural strength and shock proof beam design. The transmission parts and control servo motor system of the machine are imported from Japan and West Germany for assembly. The combined parts are processed by CNC, and the flat grinding surface is plated with hard chrome, so that the printing can be operated for a long time without displacement of accuracy, effectively improving the mechanical accuracy and printing stability, To achieve the goal of precision screen printing, it is a highly efficient screen printing equipment. Now let's analyze some small problems that may occur during the use of the sharp screen printing machine:

1. When the screen printing machine table is moving in and out, the thin plate has the phenomenon of flying plate. The buffer speed of the motor at the last section can be adjusted to prevent the machine from stopping too quickly.

2. The single table operation procedure needs to be changed. When operating, the lower table is outside, and the staff cannot receive oil or check the printing situation, the workbench should be changed to the inside.

3. When the table top is adjusted with a little force, the table top will run away from the electromagnet, because the electromagnet's retraction force is not too small, it can be adjusted to fit.

4. When the upper table is placed outside, there will be displacement. Adjust the cylinder for positioning and positioning accuracy.

5. The main reason for the offset of the positioning print is that the damping glue may be too long. Replace it with a new one to stabilize its tension.

More about the analysis of the problems of the sharp screen printing machine: http://www.szvstar.cn

Recommended News