Maintenance of semi-automatic punching machine
1、 Daily maintenance specification: remove the dust and oil stain on the machine surface, check the corresponding fasteners, check whether the sliding parts are well lubricated, and check whether the sound is normal when moving forward and backward.
2、 Weekly maintenance specification: check whether the fixed screws of the sliding guide rail are loose, and immediately lock them with a wrench if they are loose.
3、 Monthly maintenance specification: check the pressure regulating valve and drain the water in the water filter. If the oil level in the oil pressure valve is less than one-third, add oil. Check the matching of the upper and lower nozzles. Check whether there is looseness and the deviation of the nozzle. Add oil to the sliding part for lubrication.
4、 Annual maintenance specification: check the entire electrical appliance and connector, fasten and remove dust, replace the lubricating oil on the linear guide rail and slider, replace the damaged nozzle and other vulnerable parts, and adjust and maintain the entire frame.
More technical information: http://www.szvstar.cn