Working principle of heating circulation system of laminator
Working principle of the heating cycle system of the laminator: the heat transfer oil in the heat carrier furnace is heated by the heater, enters the trough tube through the oil pipeline to heat the laminated worktable, thus indirectly heating the workpiece. The heat released by the hot oil returns to the heating box and is heated to a certain temperature by the heater, and then flows into the trough tube again to heat the laminated worktable, so as to achieve continuous heating of the laminated worktable. The heated expansion oil enters the expansion tank to prevent it from bursting.
Remarks: The temperature of the laminated worktable of the heating device with the above structure is more uniform.
More technical information: http://www.szvstar.cn