全部分类

Control System of Multilayer Plate Press

Published:

2022-11-23 15:09

Multilayer plate press the control system of is mainly as follows:

 

1. Computer control system: Windows XP operating system, an operation and monitoring system based on Intouch/Wanderware software, is easy to operate. PC Anywhere software is installed, which can realize remote online programming through modem to monitor PLC and PC.

2. PLC control system: The main PLC is installed in the Siemens S7 series PLC main control cabinet for data transmission and main power supply. Each equipment has an independent electric control cabinet and an independent PLC, and all power comes from the independent electric cabinet.

3. Data bus: Data transmission between PLCs is realized through ProfiBus and data bus. Inductors and peripherals (such as solenoid valves, button switches, warning lights, proximity switches, motors, etc.) of each individual equipment shall be wired in the traditional PLC way.

The computer is used for operating equipment and data management, monitoring and recording. The main PLC is used for data transmission between all PLCs and PCs. The PLC of each single machine can work independently in a modular system structure for easy expansion

The manual operation of each single machine in the crimping line can be operated through the buttons on the computer interface; Or use the man-machine interface of the trolley to operate the equipment at the station where the trolley is located.

More technical information: http://www.szvstar.cn

Recommended News