Partner
全部分类

Introduction to functional features of vacuum press

Published:

2022-11-23 14:52

Functional characteristics of Air compressor

A. Safety assurance:

1. Set the hydraulic safety lock. When the equipment is accidentally powered off or the cover is opened in place, the upper cover will automatically lock in the current position and will not fall. Ensure the safety of operators.

2. Set the emergency button switch. In case of an accident, press it, the laminator will cut off the main power supply, and the upper cover will remain in place. Ensure to remove the accident and handle it.

3. Alarm system: 5 sets of alarm devices are set for over temperature alarm, oil shortage alarm, upper vacuum alarm, lower vacuum alarm and water shortage alarm to ensure the accuracy and normality of the working state and improve the yield.

4. It is equipped with an emergency cover opening device, which can open the upper cover of the laminator in case of accidental power failure, take out the components and conduct reprocessing. It solves the helpless situation that components cannot be disposed timely due to accidental power failure for a long time.

5. The control circuit of the equipment is completely controlled by low voltage, which is convenient for maintenance personnel to carry out live maintenance and improve the safety factor.

6. Safety gratings and photoelectric switches of detection components are used around the equipment, which improves the safety of employees and reduces the failure rate of equipment.

B. Structural features:

1. The touch screen can be turned to the structure. Advanced technology, elegant appearance, compact structure and convenient operation.

2. The upper flange structure is attached with the upper flange fixing connecting block, which can easily fix the upper flange at the corresponding installation position, making it easier to replace the rubber plate.

3. The sealing rubber ring is placed on the top to extend the service life.

4. The power arm balanced lifting structure makes the opening and closing of the upper chamber more stable and safe.

5. The rubber plate anti wrinkle structure extends the service life of the rubber plate.

6. The structure of the heating platform is made of fine machined thick steel plate, and a totally closed oil circulation system is carried out at the lower part of the platform to ensure the temperature uniformity and controllability of the component packaging.

7. The fixing bolts of the upper box flange shall be exposed to facilitate the replacement of the rubber plate.

C. Application characteristics:

It can be laminated and solidified once or twice. The compatibility of equipment production components is strong.

D. Performance characteristics:

1. The intelligent temperature control system makes the temperature more uniform and easier to set and control.

2. The laminating pressure can be adjusted according to the process, so that the quality of the components is better

3. It can work under high temperature for 24 hours continuously.

4. The advanced touch screen operation platform makes the operation more intuitive and understandable. The response is faster, the performance is more stable, and the failure rate is further reduced.

5. Adopt a completely humanized system operation process. The whole equipment is equipped with multiple detection switches. In normal production work, the operator only needs to put the components on the heating platform and press the cover closing switch. The equipment will automatically laminate, cure, and open the cover, waiting for the operator to handle the next process.

6. Adopt a completely humanized system operation process. The whole equipment is equipped with multiple detection switches. In normal production work, the operator only needs to put the components on the input platform and press the input switch. The equipment will automatically input the components to the host for encapsulation and solidification, and automatically output them to the designated position for the operator to handle the next process, and automatically carry out the next cycle of work.

7. The three-stage linkage structure is compact, and the input and output adopt the belt structure to ensure the stability requirements of the components to be pressed.  

More technical information: http://www.szvstar.cn

 

Recommended News